Medical metal composite wall board, also known as steel composite wall board, medical steel wall board, is now widely used in hospital construction, because the medical steel composite wall board has an important characteristic, the surface of the antibacterial powder paint, can effectively inhibit the rapid reproduction of bacteria, while the use of hot melt galvanized steel plate as the base material, with the advantages of anti-corrosion, easy to daily spray disinfectant and scrub, Therefore, when the hospital is under construction, the purchase of medical steel composite wallboard must be the purchase of antibacterial paint.
Composite plates can be divided into metal composite plates and non-metal composite plates. Although they can be used for wall decoration, there are still differences in the specific installation.
We are divided into four categories, metal composite board, ordinary composite board, stone hollow board, steel wire mesh cement board.
Metal composite plate in the installation, assembly is convenient, according to the installation tutorial equipped by the manufacturer, basically can be installed in place, low technical requirements, short installation cycle. The allowable deviation of the vertical degree of the facade of this kind of material is within 2MM, the allowable deviation of the surface smoothness is within 2MM, the allowable deviation of the square Angle of the Yin and Yang is within 3MM, and the allowable deviation of the height difference of the seam is within 1MM.
Common composite board includes rock wool composite board, polyurethane composite board and so on. The allowable deviation of the vertical degree of the facade of this kind of material is within 3MM, the allowable deviation of the surface smoothness is within 3MM, the allowable deviation of the square Angle of the Yin and Yang is within 3MM, and the allowable deviation of the height difference of the seam is within 2MM.
Stone hollow plate with building stone for raw materials, because the addition of fiber, cement, perlite, river sand, slag, etc., so the mechanical strength is relatively good. The allowable deviation of the vertical degree of the facade of this kind of material is within 3MM, the allowable deviation of the surface smoothness is within 3MM, the allowable deviation of the square Angle of the Yin and Yang is within 3MM, and the allowable deviation of the height difference of the seam is within 2MM.
The steel wire mesh cement board uses steel wire mesh as reinforcement material and cement mortar as base material. The allowable deviation of the vertical degree of the facade of this kind of material is within 3MM, the allowable deviation of the surface smoothness is within 3MM, the allowable deviation of the square Angle of the Yin and Yang is within 4MM, and the allowable deviation of the height difference of the seam is within 3MM.
Post time: Jun-15-2023
